<![CDATA[Elektronmods

<![CDATA[Elektronmods - Software]]> https://elektronmods.com/ Sun, 04 Oct 2026 22:18:41 +0000 MyBB <![CDATA[Digisophie - A Metallic Percussion Synth for the Digitakt 1]]> https://elektronmods.com/showthread.php?tid=29 Fri, 02 Oct 2026 14:09:31 +0000 soejrd]]> https://elektronmods.com/showthread.php?tid=29
You can run Sophie on at least one track without running into CPU/DSP problems. Using FAST AUDIO I was able to run 2 tracks no problem.

Code:
SRC     knob	Control	What it does
A	TUNE	Pitch
B	MODEL	FUSE / BOOM / PIPE / SHARD
C	FOLD	Wavefolder
D	SAMP	Stock sample selector; Sophie does not use the sample
E	SWEEP	Bipolar pitch sweep toward the played note
F	METAL	FM/ring intensity
G	FBK	Oscillator feedback
H	COLOR	Inharmonic character

]]>
You can run Sophie on at least one track without running into CPU/DSP problems. Using FAST AUDIO I was able to run 2 tracks no problem.

Code:
SRC     knob	Control	What it does
A	TUNE	Pitch
B	MODEL	FUSE / BOOM / PIPE / SHARD
C	FOLD	Wavefolder
D	SAMP	Stock sample selector; Sophie does not use the sample
E	SWEEP	Bipolar pitch sweep toward the played note
F	METAL	FM/ring intensity
G	FBK	Oscillator feedback
H	COLOR	Inharmonic character

]]> <![CDATA[Digineighor - A Neighbor Machine for the Digitakt Mk1]]> https://elektronmods.com/showthread.php?tid=21 Thu, 01 Oct 2026 00:06:42 +0000 pina]]> https://elektronmods.com/showthread.php?tid=21 Status: Alpha
What it does
A neighbor machine that lets you duplicate the audio from one track into a 2nd and apply separate FX

.png

Screenshot 2026-09-30 191023.png (Size: 58.18 KB / Downloads: 273)

Install
Elekloader!
Usage
Func + SRC then select Neighbor. Afterward the Slot corresponds to the track you are mirroring.

Compatibility
Digitakt Mk1 Latest Firmware
Risks and disclaimer
Custom firmware is unofficial and not supported by Elektron. Back up first and use at your own risk.

Feedback wanted
Theres a whole lotta empty space in the machine for features, let me hear them Smile

]]> Status: Alpha
What it does
A neighbor machine that lets you duplicate the audio from one track into a 2nd and apply separate FX

.png

]]> <![CDATA[Digiemu - A Digitakt and Digitone Emulator]]> https://elektronmods.com/showthread.php?tid=20 Thu, 01 Oct 2026 00:02:47 +0000 pina]]> https://elektronmods.com/showthread.php?tid=20 Status: Stable
What it does
An emulator (with gui) for the Digitakt and Digitone Mk1. Bring your own syx file.
Features

Full speed emulation
Emulated +Drive
Debug features for developing elekloader mods.

Demo

Screenshot 2026-09-30 185957.png (Size: 470.56 KB / Downloads: 666)
Known issues / limitations

Slow on Apple silicon?

Compatibility
Works on Windows, Linux, and MacOs
Risks and disclaimer
Custom firmware is unofficial and not supported by Elektron. Back up first and use at your own risk.
Feedback wanted
If you run into performance issues please list your build.

If you have any suggestions please feel free to leave them below or contribute a PR yourself Smile

]]> Status: Stable
What it does
An emulator (with gui) for the Digitakt and Digitone Mk1. Bring your own syx file.
Features

Full speed emulation
Emulated +Drive
Debug features for developing elekloader mods.

Demo

Screenshot 2026-09-30 185957.png (Size: 470.56 KB / Downloads: 666)
Known issues / limitations

Slow on Apple silicon?

]]> <![CDATA[DigiFilter - Extra per-track filter modes (BP/BP2/COMB/TRASH)]]> https://elektronmods.com/showthread.php?tid=17 Wed, 30 Sep 2026 20:51:48 +0000 DigiAlchemy]]> https://elektronmods.com/showthread.php?tid=17 DigiFilter.

It adds four filter types on top of the stock LP / HP / EQ:1..5:
TYPE mode
BP band pass (state-variable filter)
BP2 a wider band pass (about half the resonance)
COMB feedback comb, delay from FREQ, feedback from RESO
TRASH second comb at half the delay (a higher harmonic series)

Each mode runs per track and uses that track's own FREQ, RESO and filter envelope, exactly like the stock types. Stock TYPE values keep running the stock filter — nothing here reimplements a stock mode, just keep cycling through the filter types until you get to the new types.

Comb+Trash filter controls : repurposes the base / width filter controls (set to default) and replaces them with comb delay and harmonics.

https://github.com/DigiAlchemydsp/DigiFilter/releases]]> DigiFilter.

It adds four filter types on top of the stock LP / HP / EQ:1..5:
TYPE mode
BP band pass (state-variable filter)
BP2 a wider band pass (about half the resonance)
COMB feedback comb, delay from FREQ, feedback from RESO
TRASH second comb at half the delay (a higher harmonic series)

Each mode runs per track and uses that track's own FREQ, RESO and filter envelope, exactly like the stock types. Stock TYPE values keep running the stock filter — nothing here reimplements a stock mode, just keep cycling through the filter types until you get to the new types.

Comb+Trash filter controls : repurposes the base / width filter controls (set to default) and replaces them with comb delay and harmonics.

https://github.com/DigiAlchemydsp/DigiFilter/releases]]> <![CDATA[MonoTakt - Digitakt as a controller for MonoModule VST]]> https://elektronmods.com/showthread.php?tid=15 Wed, 30 Sep 2026 17:42:21 +0000 vxxm]]> https://elektronmods.com/showthread.php?tid=15 MonoModule VST with a Digitakt. Basically, a kind of guerrilla MonoMachine.

The main changes from the original firmware are:

CC values in the SRC, FLTR, AMP & LFO pages now go from 0–127 (except LFO destination).
CC numbers in the SRC, FLTR, AMP & LFO pages have been remapped to match the SYN, FLTR, AMP & FX parameter layout in MonoModule.*

CC values in the SRC, FLTR, AMP & LFO pages now go from 0–127 (except LFO destination).
CC numbers in the SRC, FLTR, AMP & LFO pages have been remapped to match the SYN, FLTR, AMP & FX parameter layout in MonoModule.*

Since the Digitakt doesn't send MIDI from the Audio Track sequencer, you need to use MIDI tracks to sequence both notes and CC messages.

This is a first draft, but I'm sharing it in case it encourages someone to work on something similar. So we can transform the Digitakt into a full controller for the MonoModule VST.

MonoTakt

Future work would be to correct the transmitted MIDI CCs and find a way to sequence one MonoModule track from a single Digitakt track.

* Only the encoder order is matched. The parameter names shown on the Digitakt screen don't correspond to the actual MonoModule functions. For example, FLTR FREQ on the Digitakt controls FLTR ATK in MonoModule.]]> <![CDATA[DigiCandy - A full-panel overlay mod]]> https://elektronmods.com/showthread.php?tid=13 Wed, 30 Sep 2026 15:56:49 +0000 DigiAlchemy]]> https://elektronmods.com/showthread.php?tid=13
A full-panel overlay mod for the Elektron Digitakt mk1 (OS 1.53) and Digitone mk1 / Digitone Keys (OS 1.43).
Press a key combo and the machine's screen is covered by a 128x64 image while everything keeps running underneath;
press the combo again to remove it.

Digitakt: TRK + YES
Digitone: MIDI + YES

No delay — it fires the moment the combo is pressed. Built for elekloader and needs its core mod.

https://github.com/DigiAlchemydsp/DigiCandy/releases]]>
A full-panel overlay mod for the Elektron Digitakt mk1 (OS 1.53) and Digitone mk1 / Digitone Keys (OS 1.43).
Press a key combo and the machine's screen is covered by a 128x64 image while everything keeps running underneath;
press the combo again to remove it.

Digitakt: TRK + YES
Digitone: MIDI + YES

No delay — it fires the moment the combo is pressed. Built for elekloader and needs its core mod.

https://github.com/DigiAlchemydsp/DigiCandy/releases]]> <![CDATA[DigiSplash - MK1 Digitakt & Digitone splash mods]]> https://elektronmods.com/showthread.php?tid=11 Wed, 30 Sep 2026 15:52:40 +0000 DigiAlchemy]]> https://elektronmods.com/showthread.php?tid=11
Unlocks the unreachable rare stock animation, plus animated splash screens and a PNG/GIF generator.

https://github.com/DigiAlchemydsp/DigiSplash/releases]]>
Unlocks the unreachable rare stock animation, plus animated splash screens and a PNG/GIF generator.

https://github.com/DigiAlchemydsp/DigiSplash/releases]]> <![CDATA[Digislicer - A proper slicer for DT1]]> https://elektronmods.com/showthread.php?tid=5 Tue, 29 Sep 2026 05:50:51 +0000 pina]]> https://elektronmods.com/showthread.php?tid=5

Digislicer is a slicer mod for the Digitakt Mk1 that gives you the ability to adjust slice points and auto slice on transients.

https://github.com/irpina/digislicer

It is now a separate machine in the FUNC + SRC menu.

Please let me know if you have any feedback.]]>

Digislicer is a slicer mod for the Digitakt Mk1 that gives you the ability to adjust slice points and auto slice on transients.

https://github.com/irpina/digislicer

It is now a separate machine in the FUNC + SRC menu.

Please let me know if you have any feedback.]]>