+- Elektronmods (https://elektronmods.com)
+-- Forum: Welcome to Modding (https://elektronmods.com/forumdisplay.php?fid=67)
+--- Forum: Mods Requests (https://elektronmods.com/forumdisplay.php?fid=97)
+--- Thread: slicer for Tonverk (/showthread.php?tid=49)
slicer for Tonverk - Invisible - 10-05-2026
digitakt 2 slicer for tonverk would be awesome
RE: slicer for Tonverk - BoxAdjacent - 10-06-2026
Tonverk has encrypted firmware so might not be possible to do any modding..
RE: slicer for Tonverk - CyberDuck79 - 10-28-2026
OP-1 Field Firmware is encrypted and a way to flash custom firmware without even needing the encryption key was found.
So the fact that firmware is encrypted mean pretty much nothing.
For the moment, as you can guess, I'm already working on an OP-1 Field custom firmware so I have not continued my investigation on the Tonverk but I can say that the open source stack they used is pretty well known, I think I have found the UART port inside the machine but have not had time to try to connect to it.
And to reply to the main topic: it would be the first thing, with maybe a live looper, that I would work on if I find a way to patch the firmware. But to be honest, I think the Tonverk is in active development, unlike other moddable Elektron boxes or, in my case, the OP-1 Field.
I'm pretty sure the features I currently develop for the OP-1 Field will never arrived from TE so It's worth spend the time on that.
The slicer seems so much like something that should be on the Tonverk that I consider it not impossible that it would be implemented by Elektron sooner or later; they simply chose to focus on what differentiates the Tonverk from their other boxes.