DigiPools

Works withDigitakt I
Updated 3 weeks ago
DigiPools
Preview picture from GitHub

About

DigiPools is a custom SRC machine mod for the Elektron Digitakt (MK1) running firmware OS 1.54, built on the elekloader ecosystem. It turns the Digitakt's Chromatic mode keyboard into a multi-sample pool player, allowing you to trigger and play different samples from the project's RAM sample pool (slots 1..127) directly across the 16 trig keys.

README

DigiPools (Digitakt MK1 — OS 1.54)

DigiPools is a custom SRC machine mod for the Elektron Digitakt (MK1) running firmware OS 1.54, built on the elekloader ecosystem. It turns the Digitakt's Chromatic mode keyboard into a multi-sample pool player, allowing you to trigger and play different samples from the project's RAM sample pool (slots 1..127) directly across the 16 trig keys.


Important

Copyright & Legal Notice: This repository contains NO copyrighted Elektron firmware binaries or intellectual property. DigiPools is an open-source modification built for the elekloader framework. Users must supply their own officially licensed Digitakt OS 1.54 firmware (Digitakt_OS1.54.syx) to generate a patched OS file on their own machine.


Features

  • New Machine: DIGIPOOLS (ID 10)
    • Accessible via the Machine menu (double-click SRC or FUNC + SRC), displayed as DIGIPOOLS (short title POOL).
    • Initializes cleanly with standard ONESHOT defaults: Forward (FWD) playback mode, center tuning, full sample length, and neutral envelope/filter settings.
    • Utilizes the stock high-fidelity sample playback engine with filters, overdrive, envelopes, LFOs, and FX sends.
  • Chromatic Mode Multi-Sample Playback
    • In Chromatic mode (KEYBOARD / FUNC + TRK), each trig key (or chromatic note) triggers a different sample from the RAM sample pool.
    • Natural octave pitch is preserved when shifting octaves UP/DOWN.
  • Instant Key-to-Sample Selection with Name Display & Real-Time Audition
    • To assign which key plays which sample:
      1. Enter Chromatic mode (FUNC + TRK).
      2. Ensure you are not in step editing / grid record mode ([REC] is off).
      3. Open the SRC page.
      4. Hold down any trig key (1-16) (without holding FUNC).
      5. Turn Encoder D (SAMP): each step displays the sample slot and name on screen, and automatically auditions the newly selected sample in real time.
      6. Release the key.
    • Sample Name Display:
      • The top OLED banner displays: KEY <key>: <slot> <Sample Name> (e.g., KEY 1: 4 808 CLAP).
      • Knob D pop-up shows K<key>:<slot> <Sample Name>.
    • Mute Protection (FUNC + Trig):
      • FUNC + Trig is strictly reserved for muting/unmuting tracks and will never trigger sample selection or popups.
    • Step Edit Protection:
      • When in step editing / grid recording mode ([REC] active), turning Encoder D functions normally to parameter-lock steps without altering chromatic key assignments.
  • Sequencer Integration (Live & Step Recording)
    • When recording live (REC + PLAY) or using Step Recording (FUNC + Trig in grid mode), trigs are automatically recorded with a parameter lock on SAMP corresponding to the exact sample played, preserving the recorded pitch and octave tuning across sequencer steps.
    • Sequenced patterns play back identically whether played live or triggered by the sequencer.

Prerequisites

To build from source:

  1. Python 3.9+
  2. ColdFire / m68k toolchain: m68k-elf-gcc (e.g. brew install m68k-elf-gcc on macOS, or pre-built ELF toolchain).
  3. elekloader: Clone elekloader alongside this repository or set ELEKLOADER_DIR=/path/to/elekloader.
  4. Stock Firmware: Download official Digitakt OS 1.54 (Digitakt_OS1.54.syx) from Elektron Support.

Building

  1. Copy the official Digitakt_OS1.54.syx into this project directory (or point to it using STOCK_OS):

    cp /path/to/Digitakt_OS1.54.syx ./Digitakt_OS1.54.syx
  2. Build and patch the firmware:

    make

    (or make STOCK_OS=/path/to/Digitakt_OS1.54.syx)

The patched firmware will be generated at:

out/Digitakt_OS1.54_DigiPools.syx

Web Browser Method (No Compiler Needed)

If you have the compiled mod file digipools-1.0.elemod (available on the Releases page):

  1. Open the elekloader Web App in your browser.
  2. Drag and drop your official Digitakt_OS1.54.syx file into the page.
  3. Add digipools-1.0.elemod (along with core and machine-pages if prompted).
  4. Click Build to download your customized Digitakt_OS1.54_DigiPools.syx. (All processing happens entirely in your browser; your files are never uploaded to any server).

Flashing Instructions

Flash the resulting out/Digitakt_OS1.54_DigiPools.syx file to your Digitakt MK1 using Elektron Transfer:

  1. Connect your Digitakt MK1 via USB.
  2. Open Elektron Transfer and connect to your Digitakt.
  3. Drag and drop Digitakt_OS1.54_DigiPools.syx into the OS Upgrade tab in Elektron Transfer.
  4. Wait for the firmware update to complete and the unit to reboot.
  5. On boot, the startup screen will display version DPLS.
  6. To restore to stock at any time, simply re-flash the official stock Digitakt_OS1.54.syx file via Elektron Transfer.

Pictures in the README load from GitHub.

Language
C
Stars
2
Forks
0
Created
10-24-2026
Last commit
3 weeks ago

Added by freeze157 on 10-24-2026 · History (1 version)




User Profile Send Private Message E-mail Find all posts Find all threads Mod Tools Admin Tools