ChopShop- Mod Loader and Mods for Rytm/Four/Keys

by bandersong·Tool

Browser firmware builder for Elektron Analog Rytm MK1/MKII and Analog Keys mods. Unofficial. Your own OS file never leaves your computer.

Updated 1 month ago
ChopShop- Mod Loader and Mods for Rytm/Four/Keys
Picture from the README

About

ANALOG FOUR NOT YET SUPPORTED LOOKING FOR TESTERS!
ANALOG KEYS CHORD MODE AND JOYSTICK RANDOM WORKS, A4 SHOULD PORT EASILY IN THEORY

I HAVE NOT YET TESTED ANALOG RYTM MK2 BUT I WILL SOON

TESTED AND WORKING :
RYTM MK1

ANALOG KEYS

USE AT YOUR OWN RISK. THE FOLLOWING WAS IN FACT WRITTEN BY CLAUDE. I READ IT AND IT IS ALL CORRECT TO MY INTERMEDIATE LEVEL UNDERSTANDING. AGAIN, YOU ARE MODIFYING YOUR MACHINE AT YOUR OWN RISK. 

Chopshop is one web page that builds modded firmware for two Elektron instruments from your own OS file. You drop Elektron's .syx (or the _dist.zip), the page identifies it by checksum, you pick mods, and it rebuilds the firmware in your browser with Elektron's open-source firmware tool compiled to WebAssembly. The download unlocks only if the output's sha256 equals the published hash. Nothing is uploaded, no Elektron files are shipped, and it works offline once loaded. You flash with Elektron Transfer.

### Analog Rytm MK1 and MKII (OS 1.73)
- **CHOP / Sample Focus.** A CHOP page where the 12 pads play one track's sample from 12 start markers, with hi-res markers, DIV, LAY, RND and step-lock in GRID REC. On the MK1 it lives on SAMPLE (press SAMPLE, pause, SAMPLE again). On the MKII it is the third SAMPLE page (SAMPLE, SMPL WAVEFORM, CHOP) and also has END.
- **SMP CUT** (needs CHOP). A second FILTER page (press FILTER, pause, FILTER again) with a low cut and a high cut per track.
- **Classic CHOP + step-lock** (MK1 only, older build): the earlier 3-knob CHOP page with step-lock, euclid accents and velocity humanise. No Sample Focus, no SMP CUT.

### Analog Keys (OS 1.56)
- **Chord memory.** Hold 2-4 keys + FUNCTION + OCTAVE UP to capture a chord; every key then plays it with itself as the root. FUNCTION + OCTAVE UP with nothing held turns it off.
- **JOY RANDOM.** FUNCTION + OCTAVE DOWN gives the active track new random joystick assignments. [NO/RELOAD] + [SOUND] undoes it.
- The two are independent: take either, or both.

Every device also has a **Control build** (Elektron's own code, only repacked): flash it first, and if it boots and plays normally the route works on your unit.

### What's tested
I ran MK1 Sample Focus + SMP CUT and Keys chord + JOY RANDOM through a 20-minute live jam with two other people. MIDI sync was solid, and I hit JOY RANDOM many times without a hang. The MKII builds are built and verified byte for byte but have never been run on an MKII. Going back to stock over a mod build hasn't been tried on a unit. The mods never touch the recovery code.

### Read before you flash
These are for OS 1.73 (Keys 1.56). Elektron's support pages now serve only 1.74 for the Rytm, and a unit on 1.74 can't take these files; going back on an MKII is likely not possible (unverified, ask Elektron support first). A 1.74 port is a planned follow-up, no date. The Analog Four isn't supported yet.

### Analog Four owners wanted
I'm looking for owners of the **Analog Four MK1 and MK2** for future testing and porting. If you have one and are up for trying builds (carefully, with a backup and a recovery plan), reply here or open an issue at https://github.com/bandersong/chopshop/issues .

Unofficial: not made, checked or endorsed by Elektron; flashing is at your own risk.

Page: https://chopshop-synth.pages.dev/ · Source (GPL-3.0-or-later): https://github.com/bandersong/chopshop · Mods repo: https://github.com/bandersong/analog-rytm-chop

README

Chopshop

Chopshop builds unofficial mods for the Elektron Analog Rytm (MK1 and MKII, OS 1.73) and the Analog Keys (OS 1.56) from your own copy of Elektron's OS file, in your browser. Then you flash the checked file with Elektron Transfer.

Use it: https://chopshop-synth.pages.dev/ (one page; it also works offline if you save it).

Demo video: ChopShop Demo

Unofficial: not made, checked or endorsed by Elektron. Changing your unit's firmware is at your own risk.

Read this first: OS 1.74

Elektron's support pages now serve only OS 1.74 for the Rytm MK1 and MKII. These mods are built for 1.73 (Keys: 1.56).

  • A Rytm already on 1.74 cannot take these files, and the page will not build from a 1.74 file.
  • Going back to 1.73 on an MKII that is on 1.74 is likely not possible. That is unverified: nobody has tried it here. Ask Elektron support before you try anything.
  • If you still have Elektron's original 1.73 file and a unit still on 1.73, use it, and do not update the unit to 1.74.
  • A 1.74 port is a planned follow-up. There is no date.

What it does

You drop Elektron's original .syx (or the _dist.zip it came in). The page identifies it by sha256, you pick mods, and it rebuilds the firmware in a Web Worker (Elektron's open-source firmware tool compiled to WebAssembly) and checks the result. The download appears only if the output's sha256 equals the published hash for that build. Nothing is uploaded. No Elektron code or files are shipped; you supply your own.

Unit Builds
Analog Rytm MK1, OS 1.73 Control (no mods), Sample Focus, Sample Focus + SMP CUT, classic CHOP + step-lock
Analog Rytm MKII, OS 1.73 Control, CHOP, CHOP + SMP CUT
Analog Keys, OS 1.56 Control, chord memory, chord + JOY RANDOM, JOY RANDOM only

Not supported: OS 1.74, the Analog Four (including the MKII).

Hardware status (the author's own reports, not independent testing)

Unit Build Status
MK1 Sample Focus + SMP CUT used in a 20-minute live jam with two other people; MIDI sync solid, nothing hung
MK1 classic CHOP + step-lock worked on a unit (2026-10-06)
MK1 Control, Sample Focus not reported on a unit
Keys Control, chord memory worked
Keys chord + JOY RANDOM used in the same jam; JOY RANDOM triggered many times, nothing hung
Keys JOY RANDOM only not run separately
MKII every build never run on an MKII. Built and verified byte for byte only
any going back to stock over a mod build not tried on a unit

How to use it

  1. Open the page and drop your Elektron OS file. Its OS version must match your unit.
  2. Choose mods. First time: tick nothing. That gives the Control build (Elektron's code repacked, nothing else). Flash it first; if the unit starts and plays normally, the route works.
  3. Build and check. Takes about 10-15 seconds.
  4. Download, then flash with Elektron Transfer: drag the file onto DROP, press YES on the unit, do not power off during the update or the first start. Back up your projects first. Add one mod at a time, each only after the one before behaved.
  5. Keep Elektron's original file: the startup-menu recovery route sends it (hold FUNC, FUNCTION on the Keys, while powering on, then TRIG 4 = OS UPGRADE; DIN MIDI only). The page lists the exact steps per device.

The mods never change the unit's recovery code, and the page checks that byte for byte before offering a download.

Developers

See DEVELOPING.md: layout, package format, tests, adding a mod or an OS version. The mods themselves live in https://github.com/bandersong/analog-rytm-chop .

Banned from Elektronauts since 2026

Elektronauts login page: You can't log in as bandersong from that IP address

Licence and credits

Copyright (C) 2026 Bandersong. GPL-3.0-or-later (LICENSE); details in NOTICE. Built on elektron-firmware-tool (MIT) compiled to WebAssembly, and on gdeo607's rytm1_mods, which has no licence: credited and used as-is, and the GPL grant does not cover it. Elektron, Analog Rytm, Analog Four and Analog Keys are trademarks of Elektron Music Machines; this project is not affiliated with them.

Pictures in the README load from GitHub.

Discussion

From the forum. Replies you write here are posted in the thread.
#1
Demo video up! o7
Hello Everyone
Please read everything carefully.
https://chopshop-synth.pages.dev/
This is the direct link to the tool. It walks you through making the firmware. You ultimately flash with Elektron Transfer (for now).
_____________________________________________________________________________________________________
Chopshop is one web page that builds modded firmware for two Elektron instruments from your own OS file. You drop Elektron's .syx (or the _dist.zip), the page identifies it by checksum, you pick mods, and it rebuilds the firmware in your browser with Elektron's open-source firmware tool compiled to WebAssembly. The download unlocks only if the output's sha256 equals the published hash. Nothing is uploaded, no Elektron files are shipped, and it works offline once loaded. You flash with Elektron Transfer.

### Analog Rytm MK1 and MKII (OS 1.73)
- **CHOP / Sample Focus.** A CHOP page where the 12 pads play one track's sample from 12 start markers, with hi-res markers, DIV, LAY, RND and step-lock in GRID REC. On the MK1 it lives on SAMPLE (press SAMPLE, pause, SAMPLE again). On the MKII it is the third SAMPLE page (SAMPLE, SMPL WAVEFORM, CHOP) and also has END.
- **SMP CUT** (needs CHOP). A second FILTER page (press FILTER, pause, FILTER again) with a low cut and a high cut per track.
- **Classic CHOP + step-lock** (MK1 only, older build): the earlier 3-knob CHOP page with step-lock, euclid accents and velocity humanise. No Sample Focus, no SMP CUT.
### Analog Keys (OS 1.56)
- **Chord memory.** Hold 2-4 keys + FUNCTION + OCTAVE UP to capture a chord; every key then plays it with itself as the root. FUNCTION + OCTAVE UP with nothing held turns it off.
- **JOY RANDOM.** FUNCTION + OCTAVE DOWN gives the active track new random joystick assignments. [NO/RELOAD] + [SOUND] undoes it.
- The two are independent: take either, or both.
Every device also has a **Control build** (Elektron's own code, only repacked): flash it first, and if it boots and plays normally the route works on your unit.
### What's tested
I ran MK1 Sample Focus + SMP CUT and Keys chord + JOY RANDOM through a 20-minute live jam with two other people. MIDI sync was solid, and I hit JOY RANDOM many times without a hang.
**MKII (new, 2026-10-13):** the CHOP + SMP CUT build and the Control build have now run on a real MKII. The Control build was accepted and boots. On the CHOP + SMP CUT build, LCT and HCT start at OFF, and the CHOP page, first-hit fix, LAY and SMP CUT all passed a short 4-step test card. Not tested yet on the MKII: saving a project and power-cycling, fast rolls, live REC, and the CHOP-only build on its own. The MKII builds don't have the MK1's newer live-REC lock fix yet, and they still have END mode. (Those results are from one MKII, from my own hands-on test.)
One thing you may see: with 16 steps filled and Start automated, step keys 1 and 9 flash in the record menu. It does the same on the Control build, so it's the unit's own display, not the mod.
Going back to stock over a mod build hasn't been tried on a unit. The mods never touch the recovery code.
### Read before you flash
These are for OS 1.73 (Keys 1.56). Elektron's support pages now serve only 1.74 for the Rytm, and a unit on 1.74 can't take these files; going back on an MKII is likely not possible (unverified, ask Elektron support first). A 1.74 port is a planned follow-up, no date. The Analog Four isn't supported yet.
### Analog Four owners wanted
I'm looking for owners of the **Analog Four MK1 and MK2** for future testing and porting. If you have one and are up for trying builds (carefully, with a backup and a recovery plan), reply here or open an issue at https://github.com/bandersong/chopshop/issues .
Unofficial: not made, checked or endorsed by Elektron; flashing is at your own risk.
Page: https://chopshop-synth.pages.dev/ · Source (GPL-3.0-or-later): https://github.com/bandersong/chopshop · Mods repo: https://github.com/bandersong/analog-rytm-chop
Roadmap:
Analog Rytm MKII: first hardware test done (2026-10-13); the live-REC fix and the longer test rows are next
Analog Four Mk1 and Mk2 port (Blocked; need testers)
If anyone has any ideas for possible mods please post
I'd like to thank and credit the following projects:
gdeo607/rytm1_mods: the MK1 mod framework, symbol map and build/verify tooling that CHOP is built on.
mischa85/elektron-firmware-tool (MIT): Elektron OS container tool.
irpina/elekloader: mod loader.
#2
Cool. Hope to see some development on the MK2.
#3
very cool!
the videos are offline?
does it work stable?
#4
Looks awesome! Does this mod include the added https://github.com/gdeo607/rytm1_mods features as well? Could anyone using this share a video of it running so we can see some of the magic in action?
Log in or register to reply.
Language
JavaScript
License
GNU General Public License v3.0
Stars
6
Forks
1
Created
10-11-2026
Last commit
1 month ago

Added by bandersong on 10-11-2026 · Last edited by bandersong, 1 month ago · History (2 versions)




User Profile Send Private Message E-mail Find all posts Find all threads Mod Tools Admin Tools